KJB F40709001, Руководство пользователя

Страница: 6 / 45

- 5 -
LED Indicator Status
* LED will light up when you turn the power switch to "ON", and then LED will follow below
behaviour,
Power Indicator
(Red LED)
On
1
Power on:
P-to-P Mode
Blinking
2
Slow Blinking (1s) :
Internet Mode
Off
3
Power off
SD Card
Indicator
(Green LED)
On
System ready and Micro
SD card is working
normal
Blinking
Fast Blinking (0.25s) :
SD Card Full (FS mode)
Off
Micro SD card is
abnormal or not
working
Blinking
Slow Blinking (1s) :
Recording
Battery Indicator
(Yellow LED
Device: on)
On
Powering or Battery full
of charge
Blinking
Fast Blinking (0.25s) :
less than 20% (around)
battery power left
Off
N/A
Slow Blinking (1s) :
more than 20%
(around) battery power
Battery Indicator
(Yellow LED
Device: off)
On
Powering
Blinking
N/A
Off
Battery full of
charge
Notice:
1. The Power Indicator (Red LED) will always "ON" if the CH0709c is working as P-to-P mode.
2. The Power Indicator (Red LED) will "Blinking (once a second)" if the CH0709c is working as
Internet mode.
3.
When device power off, the Red LED will off.
How to Charge The Battery
Connect the provided power adapter with the cradle. The charging time is around 3 hours and
the green LED will be on. The battery, after fully charged, can last for 6.5 hours at least under
continuous recording without wifi transmission. However, the battery power will be dramatically
reduced when recording with IR LED especially at night as well as with Wifi transmission
(
around 3-4 hours ). Under PIR motion activation or power saving mode, 720P Wifi Tissue Box
can last for longer.
* NOTE: Under low temperature conditions, the battery will have a shorter life than normal.
* NOTE: Please use the bundled power adapter only. Damage which is caused by other power
adapter will be beyond warranty.
* NOTE: For better performance it is recommended to charge the battery once every 3 weeks.
* NOTE: please re-charge the battery to full when receiving CH0709c.