Using the Detector
:
1. Calibrate the detector as stated above
2. Thoroughly cover area by moving the detector across all walls and surfaces, paying special attention to
any accessible ceilings, floors, power outlets, computer connections, and telephone jacks as these are
likely places for hidden transmitters and bugs
3. If alerted to a RF signal, move the detector away until the alert stops, then gently adjust the sensitivity of
the detector down(clockwise) before scanning the area again
4. Repeat Step 3 until origin of RF signal can be pinpointed close enough for physical inspection
5. If a further reduction in sensitivity is needed, retract the detector
’s antenna
6. Closely inspect pinpointed area for any audio or video transmission devices
7. Repeat detector calibration to start over or search for additional transmitters
Using the Camera Lens Finder
:
1. Turn on the device
2. Turn on the red, flashing LED lights
3. Point the LED lights towards the area where a camera is suspected
4. Look through the eyepiece of the device
5. Slowly and methodically scan the room to look for cameras, which will appear as bright points of blinking
light when illuminated by the red, flashing LED lights
6. If a suspected camera is found, change the vantage point and check again to avoid any false positives
caused by reflective surfaces other than camera lenses
7. Closely inspect the area for any cameras
8. Return to step 5 to start over or search for additional cameras
Note
Unauthorized repair or disassembling of the device will lose all warranties and after-sales service
To avoid damage to the circuitry, only use the supplied charger
Do not get the device wet or leave it in a moist environment
Do not expose the device to high temperatures
To avoid damage to components, do not drop or hit the device
Warning
This device is only as an auxiliary tool against wireless devices and cameras, resulting in the infringement of
personal privacy or company secrets. However, the device itself cannot substitute for all monitoring. The
manufacturers and sellers take no responsibility for any damage caused by improper use of this device.
