13
Warning
a) Do not apply any voltage to the input when the Meter is
working in capacitance measuring mode.
b) If capacitance of the circuit or capacitor be measured is
short or higher than the range be selected the display
will show “1”.
c) It is normal for taking a little more time to get the
steady reading when you do the capacitance
measurement greater than 10uF.
d) When the measurement has been completed,
disconnect the Converter Socket.
e) If you use the test leads to measure directly, when the
measurement has been completed, disconnect the
connection between the testing leads and the circuit
under test and remove testing leads from the input
terminals.
Temperature Measurement
(KJ9802 only)
To measure temperature, connect the Meter as follows:
·
Set the rotary switch to
°C
range and the display is ambient
temperature
.
·
Connect the Converter Socket into “mA” input terminal and
“COM” input terminal.
·
Connect the leads of temperature probe (k type) into
relevant socket of the Converter Sockek.
·
Put the sensor end of the temperature probe into the area
