6
Drone Operation
Operation
Turning The Drone On and
Off
The drone does not have a power
switch. It will turn on and off when
the battery is connected and discon-
nected.
Insert a fully charged battery into the
slot underneath the drone. Ensure
the battery plug is facing the rear of
the drone. Plug the red and black
cable into the battery plug. The
drone will light up.
Charging The Battery
To charge a battery, connect it to
the included USB charger. The USB
charger must be connected to a
USB power supply. The red LED will
flash twice quickly to indicate it is
charging. On completion of charging,
the red LED will remain lit on the
charger.
To charge the FPV headset, con-
nect the included micro-USB char-
ger. A red LED on the underside of
the headset will indicate the unit is
charging. Once charging is com-
plete, the red LED will turn off.
Caution
!
Take care when unplugging the
battery lead to avoid damage.
Always grasp the lead by the
white plug.
Warning
!
Lithium Polymer batteries can become
a safety and fire hazard if not used or
handled correctly.
•
Never leave batteries charging
unattended.
•
Only charge batteries with official
KiwiQuad chargers.
•
Do not attempt to charge a
swollen or damaged battery.
•
Immediately dispose of any
damaged batteries. Lithium
batteries require proper disposal;
do not dispose of with garbage.
•
Do not expose batteries to water
or modify in any way.
•
Dispose of any bent, punctured,
swollen or burnt batteries
immediately.
The camera transmitter is now
functional. The controller must now
be switched on using the switch at
the front. You will hear a single beep
to confirm power is on. Lower the
Throttle control to minimum. You will
hear another beep to indicate the
drone is bound to the controller. This
process must be repeated at each
power cycle of the drone.