Kiwi TLG8411V1 страница 60 Скачать руководство пользователя

Страница: 60 / 60

Gateway TLG8411V1 User Manual V1.0.0

July 2020

Do not give the product any physical impact.

A physical impact could cause damage or malfunction of the product.

• Take care not to drop the remote

product.

• Do not place the

product or heavy objects on the product.

Take care of the cabinet.

Incorrect care could have adverse influence such as discoloration, peeling paint, etc.

• Use a soft cloth to clean the cabinet

product. When excessively soiled dilute a neutral detergent

in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth. Do not use un-

diluted detergent directly.

• Do not use an aerosol sprays, solvents, volatile substances or abrasive cleaner.

• Before using chemical wipes, be sure to read and observe the instructions.

• Do not allow long

-term close contact with rubber or vinyl.

Avoid radio interference.

Any interfering radiation could cause disordered image or noises.

• Avoid radio generator such as a mobile telephone, transceiver, etc. around the

product.

Turn the power on/off in right order.

To prevent any trouble, turn on/off the product in right order mentioned below unless specifying.

Содержание TLG8411V1





























































Результаты поиска

Содержание TLG8411V1

Отзывы:

Похожие инструкции для TLG8411V1

Бренды по названию

Популярные бренды

Kiwi TLG8411V1, Руководство пользователя

Результаты поиска

Содержание TLG8411V1

Отзывы:

Похожие инструкции для TLG8411V1

Бренды по названию

Популярные бренды