Kiwami 4D-970, Руководство по обслуживанию

Страница: 19 / 32

3.10
3.11
3.12
Exchange reclining actuator
Service No.
「
24
、
25
」
Exchange footrest actuator
Is footrest reclining signal line and footrest reclining driving
signal line inserted surely to the connector (CN6
、
CN5
、
CN7
）
?
No
Connect connector surely.
Service No.
「
26
」
Is there any broken line in the footrest moving unit signal line
(4 center core)
？
（
Confirm by exchanging tester or stretching sensor unit of
confirming items(non-defective products)
No
Exchange sensor unit for footrest moving
units.
Exchange main circuit board.
Yes
Yes
Service No.
「
27
」
Yes
No
Is 4-pin core code of footrest
actuator inserted surely to the
connector
(CN5) of control
basement board ?
Insert connector surely
Yes
Is the junction connector for footrest driving connected surely
？
No
Connect connector surely
Yes
Is Ottoman driving 6-pin code for connection of control unit
broken
？
No
Yes
Exchange footrest driving 6-pin code.
Is footrest or reclining signal line broken
？
After exchange alternate actuator, is there any other error
occurred
？
No
Exchange applicable actuator.
Junction connector of motor 2 pin code and stretching sensor
signal 6 pin code for footrest moving unit is surely connected ? No
Connect surely junction connector
Is Connector of each code for Ottoman moving unit surely
connected 6 pin connector (CN7) for sensor signal of control
basement board, and Motor 2 pin connector (CN13) ?
No
Connect surely connector
Yes
Yes
Yes