Strona 10 z 16
rev. 1.0.1
USER MANUAL
:
KIVOS KD700mk2
MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM
WITH MULTI MONITOR
www.elmic.pl
,
2.
Indoor Monitor Starting Up
Plug in 9VDC power, long press “OK” key about 3 seconds to start up (about 1 second after shutdown), logo shall be displayed on screen
with a sound of “Beep”. Turn into standby mode.
•
Display: standby picture, signal sign, power sign, time & date
•
Red LED flashes every 4 seconds.
•
In this mode, the screen shall be dimmed after some seconds and turns into power saving mode.
•
If there is any calling record under this mode, red LED flashes every 1 second and stops flashing after checking.
•
In standby mode, long press “Switch key” about 3 seconds, “Goodbye” shall be displayed on screen with a sound of
“Beep”, the unit switches off.
3.
Outdoor unit CALL handset
In standby time mode, press “Door bell key” to call, the green LED of the outdoor unit lights up with a sound of “Du Du”.
Red LED of indoor monitor lights up, the screen shows image and the unit rings for Max. 30 seconds. If there is no reply
signal from indoor monitor, the outdoor unit stops the Call and recall is allowed.
•
Intercom: press “
OK
” on indoor monitor -
》
ring stop and the unit turns into intercom mode, red LED of indoor
monitor is off as well as green LED is on, intercom time is Max. 90seconds.
•
Monitor: press “
” monitor key on indoor monitor-
》
red LED lights up, monitor outdoor voice without being
discovered by the visitors. (One or both way intercom could be changed over by pressing “
” and “
OK
”, and it will
time again till 90seconds.).
•
Unlock: in “
OK
” on-state mode -
》
press “
” unlock key -
》
after successful unlocking, it shows unlock icon.
•
Photo: in “
OK
” on-state mode -
》
press “
” photo taking key -
》
one press one photo, the photos will be stored in
TF card.
•
Video: in “
OK
” on-state mode -
》
press “
”video taking key -
》
start taking video -
》
press “
” video taking
key again to stop, the videos will be stored in TF card.
•
Exit: in “
OK
” on-state mode -
》
press “
OK
” key (in monitor mode -
》
press “Exit” )the unit turns into standby mode
with a sound of “Beep”.
•
Automatic video: if nobody answers the call in 5 seconds, indoor monitor starts taking video automatically (Default
is automatic video. If setting is manual video, once connected, the indoor unit will take video manually) till being
stopped or max. taking time.
4.
Indoor Monitor CALL Outdoor Unit (Monitoring)
In standby mode, press “
” monitor key on indoor monitor to monitor call. In this mode, the red LED lights up.
If outdoor unit receives signal in 5 seconds, then it connects to indoor monitor, indoor machine turns into normal monitor
mode and shows image and speaks voice of outside. There is no voice speaking for outdoor unit. If outdoor unit doesn’t
receive signal in 5 seconds, then it shows “User not online” and exits monitor calling mode automatically and turns into
standby mode.
Two sets of outdoor units (Code connected successfully):
Press “
” monitor key on indoor monitor to turn into monitor selection menu -
》
press “
↑
/
↓
” key to choose code
of outdoor units -
》
press “
OK
” to turn into monitoring call mode, red LED lights up (During selection, press “Exit” to turn
into standby mode ).
•
Intercom: in monitor mode, red LED lights up, there is voice speaking for indoor monitor but not for outdoor unit -
》
press “
OK
” to turn into both-way communication, red LED shuts down -
》
press “
” monitor key again to turn back
to one way voice monitor mode. (One or both-way voice could be changed over repeatedly). Intercom time
is 90 seconds and shall be timed again after changing over.
•
Unlock: in “
OK
” on-state mode -
》
press “
” unlock key -
》
after successful unlocking, it shows unlock icon.
•
Photo: in monitor mode -
》
press “
” photo taking key -
》
one press one photo, the photos will be stored in TF card.
•
Video: in monitor mode -
》
press “
”video taking key -
》
start taking video -
》
press “
” video taking key again
to stop, the videos will be stored in TF card.
•
End: in monitor mode -
》
press “
EXIT
” key -
》
end monitor and turn back to standby mode. (In intercom mode, press
“
OK
” to hang off.)
Note: in monitor mode, red LED lights up, in intercom mode, red LED shuts down.
