Strona 9 z 12
rev. 1.0.1
USER MANUAL
:
KIVOS KDB301
WIRELESS PEEPHOLE VIDEO DOOR PHONE
www.elmic.pl
,
6.
Ringing setteings
Press“
↑
/
↓
”key -
》
choose the music you like (12 pieces in total)
Press“+/
-
”key-
》
increase or decrease the volume level (7 levels in total)
Mute: long press"-"key still there is a mute symbol.
Press "OK" key, confirm and back to standby condition
7.
Lock Delay
Press “↑”or “↓”key to adjust the time, the range of the time is 1~6 seconds.
Press "OK" key, confirm and back to standby condition
Unlocking Explanation - Only in the state of intercom, press “ON/OFF Switch” to unlock with unlocking symbol
showing on the screen.
8.
PIR : ON/OFF
Press“↑”or “↓”to choose “ON” or “OFF”, the setting value shall be sent to outdoor camera by pressing “OK” key or
“FUNC” key
PIR Explanation
The PIR detects human being within its detection range, the signal shall be sent to indoor monitor to wake up the screen
and activate photo snapping. After that, outdoor camera and indoor monitor would get into standby state.
When the screen is lit, press “OK” key to intercom.
When the configuration is one camera and three indoor monitors, the PIR function could be switched on or off through
menu of each indoor monitor. A red PIR symbol shall be shown on the top of the screen after switching on the PIR function.
The other two indoor monitors shall show PIR state synchronously when communicating with outdoor camera.
When someone is getting into the detection range of PIR, only one of the indoor monitors would be woken up and takes
photo.
After matching code, PIR would be switched off.
9.
Outdoor unit CALL handset
When the screen lights up in standby mode, press "doorbell key" to call, the background light of the outdoor unit lights up
with a sound of “Du Du”. The screen of handset shows image and the unit rings for Max. 30 seconds. If there is no reply
signal from handset, the outdoor unit stops the Call and recall is allowed.
Intercom: press “
OK
” on indoor monitor -
》
ring stops and the unit turns into intercom mode, intercom time is Max.
90seconds.
Photo: in “
OK
” on-state mode -
》
press “
FUNC”
function key - press photo-taking "
" key
》
one press one photo.
Exit: in “
OK
” on-state mode -
》
press “
OK
” key (in monitor mode -
》
press “Exit” )the unit turns into standby mode with a
sound of “Beep”.
Automatic photo shoot: if nobody answers the call in 5 seconds, indoor monitor starts taking photos automatically.
10.
Handset CALL Outdoor Unit (Monitoring)
In standby mode, press “
” monitor key on handset to monitor call. If outdoor unit receives signal in 5 seconds, then it
connects with outdoor unit, handset turns into normal monitor mode and shows image and speaks voice of outside. There
is no voice from outdoor unit, it will be in monitoring. If the handset doesn’t receive signal in 5 seconds, it turns back to
standby mode automatically.
Intercom: in monitor mode, there is voice from handset but not from outdoor unit -
》
press “
OK
” to turn into both-
way communication -
》
. Intercom time is 90 seconds .
Photo: in monitor mode -
》
press photo-taking"
" of “
FUNC”
fuction key -
》
one press one photo.
End1: in monitor mode -
》
press “
” monitor key -
》
end monitor and turn back to standby mode.
End2: in intercom mode, press “
OK
” to hang off and turn back to standby mode.
11.
Exposure Adjustment
Exposure adjustment: under the environment of extremely poor visibility and the image is not clear due to the brightness,
however, the brightness is adjustable: 9 grades for exposure adjustment.
In image communication mode -
》
long press “↑/↓” to adjust the grade of expsure, every press adjusts one grade.
