10
11
Using the camera
Charging
Charge your camera with the USB cable via a PC or USB adaptor (not included). The red LED lights up to indicate that the
camera is charging and it will turn off as soon as the camera has been fully charged. It takes about 3 hours to fully charge
the camera.
Inserting a memory card
Insert a micro SD card (not included) before using the camera. Ensure that the camera power is turned OFF before
inserting the card into the slot.
Note: There is only one correct direction to insert the micro SD card into the slot.
Do not force the card into the card slot as it may damage both the camera and the micro SD card.
Note: A new micro SD card should be formatted before use.
For more information, please see ‘Connecting your camera’, page 18
Setting date and time
You can set the camera’s clock with the software to ensure that your video and photo files are saved with the correct
date/time information.
To set up the camera clock
1. Connect your camera to a computer with the USB cable. Run actionplus.exe in your micro SD card folder (PC only).
2. Find the ‘Date and Time’ and click ‘SET’.
3. Adjust the date and time or click ‘Sync with PC’ to set with your PC clock.
4. Click ‘OK’ to save the settings.
5. After completing the setting, disconnect the camera from the PC immediately to ensure that the date and time
are set correctly.
