24
25
•
Mount Assembly (B) uses an adhesive mount to hold the camera and the provided straps
to fix it to a vented helmet
•
Adhesive Mounts (C) are used to mount the camera to flat/curved, smooth surfaces
C
B
Fixing the camera to a bike
1. Unscrew both screws (i) and place both halves (ii) of the Bicycle Mount (A) around the desired
position of the pole with the rubber grip in between the pole.
2. Replace the screws (i) and tighten them until the mount is firmly in place.
3. Remove the screw from the top of the Mount (iii) and slot the camera (inside waterproof case)
into position, replace screw and tighten to lock in position.
4. If you wish to use a forward facing bar you may wish to use the 90
°
adaptor (iv) in between the
camera and the bicycle mount to make the camera forward-facing.
(iv)
(i)
(ii)
(iii)
