-8-
-9-
Technical data
Technical data
Troubleshooting
Parameter\Model
КТG 160 P
КТG 180 P
КТG 200 P
System parameters (±10%), V/Hz
230/50/60
Maximum input current, А
28.5
32
36
No load voltage, V
68
68
68
Voltage level adjustment range (MIG, MAG),
A/ V
30/15.5–160/22
30/15.5–180/23
30/15.5–200/24
Voltage level adjustment range (MMA), A/ V
30/21.2–
130/25.2
30/21.2–150/26
30/21.2–
170/26.8
Load cycle (cycle 10 min, full load amper-
age) (MIG, MAG), %
20
20
15
Electrod wire d, мм
0.6-0.8
0.6-1.0
0.6-1.0
Machine efficiency, %
85
Capacity factor
0.7
Feed type
Mechanic, push
Shielding gas
CO
2
/ CO
2
+Ar/Ar
Protection class
F
Protection rating
IP21S
Cooling mode
Fan
Dimension, mm
W
450
D
196
H
354
Net weight, kg
11.5
14.4
14.8
Welding machine
1
Welding torch MIG with a cable
1
Welding cable with a negative clamp 1
Gas hose
2 m
User’s manual
1
Safety rules for using gas cylinders
• Handle the gas cylinders carefully, as
they can explode if damaged.
• Never expose cylinders to high
temperatures, sparks, open flames,
mechanical shocks or welding arcs.
• Do not touch the cylinder with the
electrode holder and the connected
electrode.
• Do not weld on the cylinder.
• Keep the cylinder in a vertical position
on a special cart. Ensure a stable posi-
tion of the gas cylinder.
• Keep cylinders away from welding and
electrical appliances.
• Use the appropriate controls, gas
hoses and fittings provided specifi-
cally for use with the gas cylinder.
• Do not look at the valve hole when
opening.
• During storage, use the protective
cylinder cap.
Maintenance and repair
• Do not open the welding machine
cover for maintenance and repair until
the power source from the incoming
electrical power is disconnected.
• Keep components away from static
electricity. Do not touch the PCB
without being properly grounded with
a special bracelet. For storage and
transportation, place the welding
machine PCB in an antistatic, strong
packaging.
• Do not modify the machine in any mat-
ter. Unauthorized modifications can
lead to malfunction and/or safety rules
violation and may affect the lifetime of
the equipment.
• If a fault is detected, immediately
unplug the machine and do not start
working until failure is eliminated.
• Keep the unused welding machine in a
safe place out of the reach of children.
Before storage, make sure that the
machine is in good order and is suit-
able for future use.
Safety instructions
Subject to change!
