10
11
Bluetooth setup
Pairing a Bluetooth device for the first time
With the mains plug connected and/or batteries inserted:
1. Press (don’t hold) the power button (6)
2. The power light (1) will turn from red to green and the Bluetooth light (2) will flash slowly
3. Press and hold the Bluetooth/Play/Pause button (5) for up to 5 seconds and the Bluetooth light (2)
will flash quickly
4. Using the controls on your Bluetooth device, select the ‘Slam’ in your Bluetooth settings to pair
Note: If your device requests a password, enter ‘0000’.
Note: Refer to your device’s user manual for instructions on pairing and connecting Bluetooth devices.
5. When connected, the Slam will beep and the Bluetooth light (2) will turn solid
Note: After initial pairing, the unit will stay paired unless it is unpaired manually by the user or
erased due to a reset of the device. If your device should become unpaired, follow the directions
in the ‘Re-pairing or pairing new devices’ section.
Re-pairing or pairing new devices
1. Make sure Bluetooth is turned off on any previously paired devices
2. Press (don’t hold) the power button (6) on the Slam
3. After 5 seconds, press and hold the Bluetooth/Play/Pause button (5) for up to 5 seconds and the
Bluetooth light (2) will flash quickly
4. Using the controls on your Bluetooth device, select the ‘Slam’ in your Bluetooth settings to pair
Note: If your device requests a password, enter ‘0000’.
5. When connected, the Slam will beep and the Bluetooth light (2) will turn solid
Using Bluetooth
Playing audio wirelessly
1. Follow the instructions in the ‘Pairing a Bluetooth device’ section
2. Use the controls on your device to select a track
3. To play, pause or skip the selected track, use the controls on your device or press the
Bluetooth/Play/Pause (5) button on the Slam
4. To skip a track, you will have to do so on your device
5. Audio played on the connected Bluetooth device will now be heard through the speakers
6. The volume can be adjusted on both your device and the Slam
