8
9
Playing music
Pairing a wireless device
1. When first powering on your Reunion they will automatically enter pairing mode
2. Turn on your iOS, Android, or Windows device’s Bluetooth
®
ON and search for new device
3. Select ‘KS Reunion’. If asked for a passcode, enter ‘0000’, and they will be paired
4. Once paired the LED indicator (1) will be solid blue
Note:
The Reunion will automatically connect to the last paired device.
Note:
‘Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is in no way affiliated or endorsed by Bluetooth SIG Inc.
Re-pairing or pairing new devices
1. Turn off Bluetooth connectivity on any previously paired devices
2. Follow the ‘Pairing a wireless device’ instructions from step 1
OR
1. Short press Pair (I) on the remote to break any existing pairing
2. Follow the ‘Pairing a wireless device’ instructions from step 1
Playing music wirelessly
When connected wirelessly, play the music on your device and the sound will play through the speakers. Some devices may require you
to select the audio output.
If your device is A2DP Bluetooth-enabled, you can use the following functions:
Play/Pause
Short press (D)
Next/Previous track
Short press (E)
Connecting through auxiliary
1. Connect the music source by inserting either end of a 3.5 mm aux cable into the music source and the other into the Aux-in port (6)
2. Either short press Aux mode (L) on the remote or cycle through the modes on the back panel by pressing the Mode/Volume dial (3)
3. Refer to the LED indicator section (page 7) to know which mode you’re in
Note:
In this mode, Play/Pause and Previous/Next track will not work.
Connecting through RCA
1. Connect the music source by inserting the RCA cable ends into the corresponding white and red RCA ports (7/8)
2. Either short press RCA mode (K) on the remote or cycle through the modes on the back panel by pressing the Mode/Volume dial (3)
3. Refer to the LED indicator section (page 7) to know which mode you’re in
Note:
In this mode, Play/Pause and Previous/Next track will not work.
Please note:
Your device will have an internal amplifier and if it is playing digital files like MP3s it will also have an integrated DAC (Digital
Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted signal. To avoid this, and to get the best
quality from the speaker, we recommend that you do not run your device any higher than 95% volume. Some devices output higher
than others, so you may need to reduce the volume if you experience distortion.
Adjusting controls
Volume
Turn the Mode/Volume dial (3) clockwise to increase, or counter clockwise to decrease volume. The LED indicator (1)
will flash purple twice to indicate each adjustment. When you reach maximum volume, a ‘beep’ tone will sound.
Bass
Turn the Bass dial (4) clockwise to increase, or counter clockwise to decrease bass. The LED indicator (1) will flash
purple twice to indicate each adjustment.
Treble
Turn the Treble dial (5) clockwise to increase or counter clockwise to decrease treble. The LED indicator (1) will flash
purple twice to indicate each adjustment.
Mode
Short press Mode/Volume dial (3) to cycle through BT, AUX, and RCA mode.
