10
11
Specifications
Troubleshooting
•
If you cannot connect the headphones to your device, please try the following:
– Ensure that the headphones are charged, switched on, paired with and
connected to your device
– Check the headphones are within 10 metres (30 feet) of your device and that
there are no obstructions (such as walls or other electronic devices) between
the headphones and the device
– Only one device may be paired to these headphones at a time, so please ensure
there are no conflicting Bluetooth devices trying to connect to the headphones
•
If the headphones will not switch off, they can be reset back to normal by putting
them on charge
•
If you receive an intermittent signal, please ensure the headphones are fully
charged before continuing use
•
If you do not use the headphones for longer than 3 minutes whilst not connected
to a device, they will automatically power off to conserve power
We hope you’ve now got all the information you need to get started, but
if you’re having problems with anything, please feel free to contact us at:
[email protected]
Please do not attempt to open this product. There are no user serviceable parts inside, in particular
if your product has an embedded, non-replaceable battery, do not attempt to access or remove the
battery as this may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may
occur as a result of product improvement and development.
Bluetooth
V4.1
Bluetooth range
up to 10 m
Frequency response
20 Hz – 20 kHz
Talk time
(NC and BT turned on) 15 hours
Play time
(NC and BT turned on) 12 hours
Standby time
up to 30 hours
Environmental Noise Cancellation
25 dB reduction
Battery type
Lithium Polymer 550 mAh, rechargeable
Power requirement
5 V DC