10
11
Instructions for use
Getting started
1. Plug the power adaptor into a convenient AC wall outlet and switch it on
2. Insert the connector into the DC input (B)
3. The LED indicator (C) will be red to indicate it is charging
4. When the LED indicator (C) goes out, this means the battery is fully charged
5. Press the power button (18) on the remote to turn the Glow on or press and hold the power (A)
button on the Glow for 2 seconds
6. Press the power button (18) again to turn the Glow off or press and hold the power (A) button
for 2 seconds
Note:
Charging time will take up to 10 hours to complete. When fully charged, you can then use
the Glow without the mains power adaptor.
Bluetooth setup
Pairing a Bluetooth device for the first time
With the Glow turned off:
1. Press the power button (18) on the remote followed by the Pairing button (19) or press and hold the
power (A) button on the Glow for 4 seconds
2. The LED indicator (C) will flash blue quickly
3. Using the controls on your Bluetooth device, select the ‘KS GLOW’ in your Bluetooth settings to pair
Note:
If your device requests a password, enter ‘0000’
Note:
Refer to your device’s user manual for instructions on pairing and connecting Bluetooth devices
4. When connected, the Glow’s LED indicator (C) will turn solid blue
Re-pairing or pairing new devices
1. Make sure the Bluetooth is turned off on any previously paired devices
2. Follow step 1 onwards from initial pairing instructions
Using Bluetooth
Playing audio wirelessly
1. Follow the instructions in the ‘Pairing a Bluetooth device’ section
2. Use the controls on your device to select a track
3. To play or pause the selected track, use the controls on your device or press the Play/Pause button (15)
4. To skip a track, use the controls on your device or press the Previous Track button (13) or Next Track
button (14)
5. Audio played through the connected Bluetooth device will now be heard through the speakers
6. The volume can be adjusted on both your device and the Glow. To change the volume on the Glow,
press the Volume– (16) and (17) buttons
Note:
Track control functions from the buttons on the Glow and remote will require your device to have
Bluetooth profile AVRCP. Please check your device’s manual if unsure.
