10
11
Bluetooth setup
Pairing the speaker to your device
Before you can use the speaker via Bluetooth, it will need to be paired to your device.
To do this:
1. Short press On/Off (1) to turn the Flair on
2. After 6 seconds, the speaker will automatically enter pairing mode
3. The Bluetooth indicator light will be flashing blue quickly
4. Turn your device’s Bluetooth ON and search for new devices
5. When KSFLAIR appears in the list, select it and if asked for a passcode, enter ‘0000’
6. The speaker should then be paired to your device and the LED light indicator (2) will be a solid blue and slowly
flashing blue when playing music
7. To un-pair, press and hold play/pause (7) and the LED light indicator will be quickly flashing blue and the Flair
will automatically go back to pairing mode
To pair additional devices to the speaker, first make sure the Bluetooth on any devices that have already been paired
to the speaker is turned off. Then follow the above instructions from step 1.
Playing music on your speaker
Bluetooth
If already connected to the speaker via Bluetooth, simply find and play the music on your device and the sound will
play through the speaker. Some devices may require you to select the audio output. You should be able to do this by
going to the ‘Listen via’ or ‘Play via’ menu. If unsure, please refer to your device’s manual.
If you are using an A2DP Bluetooth-enabled device, you will be able to use the following functions on the speaker:
•
Play/Pause (7)
– short press
•
Next track (4)
– short press
•
Previous track (3) – short press
•
Volume– (5)
– short press
•
(6)
– short press
