8
9
FM menu
In FM mode, press Menu (7) to enter FM settings, and use Next Track (6) or Previous Track (5) to scroll.
1. Scan settings
•
Press MFB (9) to select ‘Scan setting’, and press Next Track (6) to change between ‘strong stations only’, or ‘all stations’
•
Press MFB (9) to confirm your selection
2. Audio settings
•
Press MFB (9) to select ‘Audio setting’
•
Press Next Track (6) to change between ‘forced mono’ or ‘stereo allowed’
•
Press MFB (9) to confirm your selection
3. System
•
Press MFB (9) to select ‘System’
•
Here you can change the sleep, alarm, time, and language settings, reset all settings, and find the software version
Note:
You should always be in stereo mode. Forced mono is used when you have a weak signal and the radio is struggling to connect.
When this happens, you should change mode.
Pairing and listening in Bluetooth mode
1. Press Mode (10) until you reach Bluetooth mode on the LCD Display (1)
2. The LCD Display (1) will flash ‘Bluetooth Disconnected’ while looking for a device to pair with
3. Turn on your iOS, Android, or Windows device’s Bluetooth ON and search for new devices, and select the speaker name
‘KS BOOMDAB’ from the list of found devices
4. If your device asks for a passkey then enter the digits ‘0000’ and press OK
5. When pairing is successful the LCD Display (1) will flash ‘Bluetooth Connected’
Note:
If there is an existing wireless connection, press and hold Pair (8) for 3 seconds and it will break the current connection.
To reconnect, refer back to ‘Listening in Bluetooth mode’.
Note:
‘Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is in no way affiliated or endorsed by Bluetooth SIG Inc.
When connected via wireless, you can either control the music through your device or using the Boom DAB. If using the Boom DAB:
•
Use Next Track (6) or Previous Track (5) to change song
•
Press MFB (9) to play/pause your song
•
Turn Volume (3) to increase or decrease the volume
Aux-in mode
1. Press Mode (10) until you reach AUX on the LCD Display (1)
2. Plug one end of the aux cable into the Aux-in Port (14) and the other end into the aux-in port on your device
3. Play music through your device, and the sound will play through the Boom DAB
Note:
When connected via aux-in, you can only control the music through your device. Turn Volume (3) to increase or decrease the volume.
