Kitronik BBC Micro Bit move Mini Mk2, Инструкция по эксплуатации, Страница: 6 / 8

Add the second side panel on the
opposite side, like in Step 10. Slot the
rear bucket panel in and tighten the
screws in the base. Finally
insert the second
M2 x 6mm screw into the
rear panel and secure with
another M2 nut.
ADD RIGHT SIDE
12
Rotate the tipper backwards
and slot the base panel of
the tipper bucket into place,
followed by the front panel.
ASSEMBLE REST OF BUCKET
13
NOTE:
The front panel will only fit in
one way.
Install the two remaining
M2 x 6mm screws at the front of
the tipper and secure in place
with the M2 nuts.
FINAL BUCKET SCREWS
14
M2 x 6mm
M2 x 6mm