6
Installation
For installation of the Twin Hook Electric Chain Hoist, refer to "Installation" in the ER2 Series Electric Chain Hoist Owner's
Manual (separate volume). With reference to the trolley mount, mounting the trolley at the end of the beam is the best
method from the structural point of view.
Installation or uninstallation should be performed only by personnel who are professional or
•
competent.
(Consult your dealer or KITO; otherwise make a request of professional or competent
personnel for installation.)
Failure to follow this precaution may cause serious injury or property damage.
DANGER
PROHIBITED
CAUTION
At the time of installation, make sure that the load chain properly engages with the idle sheave
•
without being twisted or slack. In mounting the trolley onto the beam by extending the trolley
width, make sure that the trolley does not derail.
Failure to follow this precaution may cause serious injury or property damage.
COMPULSORY
Operations
This twin hook electric chain hoist is operated the same as a standard hoist. Please refer to the sections of "How to Use"
in "ER2 Series Electric Chain Hoist Owner's Manual" (separate volume).
Do not obliquely lift a load.
•
Do not use the twin hooks whose heights are different.
•
Do not lift a load only via the Bottom hook 2.
•
Failure to follow these precautions may cause serious accidents leading to serious or even fatal injury.
DANGER
PROHIBITED
CAUTION
When lifting a load only via the Bottom hook 1, reduce the load to a half of the rated load or
•
less.
Make sure that the twin hooks vertically rises in lifting a load.
•
Use a hoist whose specifications (span) is suited for a load length.
•
Failure to follow these precautions may cause serious injury or property damage.
COMPULSORY
