KITO ER2-075S, Дополнение к руководству пользователя, Страница: 18 / 56

18
1) Remove holder A installed on the connection box.
2) Remove the cable packing from the power supply cable, and pass holder A through the power
cable.
3) Pass the cable packing through the power cable (see the figure P17), and then insert it into the
connection box.
4) Tighten holder A, and fix the power cable to the connection box.
Trolley Type ●
1) Mount the cable holder, which the Power Cable is passed, to the cable holder arm using a chain
hanging pin B, a slotted nut and a split pin.
5) Connect the power cable to the terminal panel on the connection box.
(Refer to the wiring diagram on the connection box to perform wiring correctly.)
6) Fix the cable holder on the power cable to the cable holder arm.
Connecting the power cable
●
1) Insert the plugs (4P) of the relay cable for power into the sockets (4P) of each of 2 hoists, and
securely tighten the lock rings.
2) Insert the plugs (8P) of the relay cable for operation into the sockets (8P) of each of 2 hoists,
and securely tighten the lock rings.
1) Insert the plug (8P) of the push button swtich cord into the socket (8P), and securely tighten
the lock ring.
2) Insert the cord chain stopper into the end ring of the protection wire, and fix the stopper to the
socket holder with a pan head screw. For 15t and 20t, fix the cord-support wire stopper to the
joining plate with a pan head screw.
Connecting the relay cable
●
Connecting the push button switch cord
●
Direct-mount ●
1) Mount the Holder B, which the Push Button Switch Cord is passed, to the plate D using the
holder nut.
2) Connect the Push Button Switch Cord to the terminal panel of the Connection Box.
Assembling
Connecting Cables