User Manual KiweeOne
14
6.2.d Setting up the rope belt on the
wind turbine
IMPORTANT : The upper
strand on the generator
must be placed on the upper
side of the rope belt pulley.
IMPORTANT : The safety pin
must separate both strands
of the rope belt.
•
Unlock the locking tab (28) (Production position),
see positions p9.
•
Unreel by hand about 1m of the rope belt (100)
•
Lock back the locking tab (Lock position)
•
Remove the safety pin (37)
•
Pass the loop between the guides (12), and behind
the rope belt pulley (16)
•
Put back the safety pin.
100
16
28
12 : Rope guides
16 : rope belt pulley
28 : Locking tab
37 : Safety pin
100 : rope belt
Ending
position
Starting
position
37
12
6.2.c Check-list
Before proceeding further, take the time to check the
correct tightening of all screws.
Check the position of the toothed belt. It must be
positioned as shown in the right image.
The toothed side is positioned on the toothed pulleys and
the smooth side on the two small pulleys.
