Kitett KOLOR CLIP, Инструкция по эксплуатации

Страница: 31 / 165

29
c. After each use
d. Dismantling the breast pump
1 - Unscrew the breast shield
/ handle unit from the bottle.
2 - Remove the taupe-
coloured “Clean Valve”. Use
the bottle stand to avoid any
risk of upsetting the bottle.
3 - Place the cap firmly on
the bottle. Please refer to the
following section regarding
the preservation/de-freez-
ing of breast milk. Breast
milk can be kept in a refrig-
erator at 4°C for 48 hours.
4 - After use, rinse all parts in
contact with milk in cold wa-
ter. Then wash them in hot
and soapy water. Rinse and
leave to dry in the open-air
on a piece of paper towel.
1 - Disconnect the handle/
body/membrane assembly of
the breast shield by twisting
slightly on the side
2 -Twist the handle upwards
to release it from the body
of the breast pump.
3 - Remove the membrane
and its base. Carefully re-
move the stem from the
base, making sure you do
not damage the membrane
orifice.
4 - Dismantle the two parts
comprising the valve: the
transparent valve and
taupe-coloured positioning
ring.
GB
1
3
1
3
2
2
4
4