ENG
User manual: KitchPRO Chocolate Fountain Large
Model no:
CF16A
Technical data:
Capacity: 170W
Voltage: 230V/50HZ
Important precautions:
Always make sure that you read the user manual in full and understand the instructions before use.
1.
Never immerse the base of the unit into water or any other liquid.
2.
Do not use this unit in or near water, this is an electrical appliance.
3.
Never use abrasive cleaning agents.
4.
Never leave the unit unattended while in use or when plugged into an outlet.
5.
Do not assemble the auger or tower while motor is running. Turn unit OFF first. It is preferable to be
unplugged while assembling pieces.
6.
Do not handle the auger when in motion.
7.
Unplug the unit from outlet when not in use and when cleaning.
8.
Never use this unit if the power cable or casing is damaged in any way.
9.
Never place anything other than the intended ingredients in the base bowl.
10. Keep the unit away from children, it is not a toy.
11. Do not place the unit onto any hot surfaces.
12. Not recommended for outdoor use.
13. The plug has one blade that is wider than the other, to reduce the risk of electrical shock, this plug is
intended to fit into a polarized outlet only one way.
14. A short power supply cord is provided to reduce the risk of entangling or tripping-over by a long cord.
15. Electrical extension cords can be used if care is exercised in their use. The marked electrical rating of an
extension cord should be at least as great as the electrical rating of the appliance.
Assembly:
Your Chocolate Fountain is designed for easy use but please ensure you follow these steps before using it.
1.
Clean the base bowl before use.
2.
Wash the auger and the auger column with warm water then dry thoroughly before use (see diagram on
page 2 for parts).
3.
Once cleaned, ensure the unit is disconnected from the mains and then return auger to base making sure it
is securely in place by aligning the groove on the bottom of the auger to the motor base pin. Make sure it is
secured and locked into position.
4.
Do not attempt to place auger or tower on base or remove from base while motor is on.
5.
Make sure tower is fitted on the posts in the base properly.
Using your Chocolate Fountain:
1.
Ensure your Chocolate Fountain is placed on level surface, it need to be balanced equally.
2.
Choose right chocolate. It is best to use a chocolate especially produced for chocolate fondues/fountains.
However most chocolates should work just as well.
3.
After plugging in the unit, make sure your unit works by testing the motor function to see that the auger
turns and that the heater works. Once this is done. Turn both off.
4.
Now that you are ready to begin, turn the heater knob to the ON position.
5.
Choose and melt your chocolate. It is best to use a chocolate especially produced for chocolate
fondues/fountains. However most chocolates should work just as well.
1
