Kitchenware Beautiful, Инструкция по эксплуатации

Страница: 24 / 56

22
Boil-Dry Protection
If the Kettle is without sufficient water, or if the water has evaporated,
the safety thermostat automatically turns the Kettle OFF. To reset the boil-dry
protection device, remove the Kettle from the power base and allow it to cool
for at least 15 - 20 seconds before filling with fresh water and positioning on
the power base.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user serviceable
parts. Do not try to repair it yourself. Any servicing requiring disassembly
must be performed by a qualified appliance repair technician.
Care & Cleaning Instructions
WARNING: DO NOT IMMERSE THE POWER BASE, CORD, OR PLUG IN WATER OR OTHER LIQUIDS.
IMPORTANT: Never use scouring pads or harsh cleansers to clean your Programmable
Temperature Kettle as they may damage the soft matte finish.
1. Empty the Programmable Temperature Kettle after each use. Do not allow
water to sit in the Kettle overnight.
2. Make sure the Programmable Temperature Kettle power base is unplugged
and completely cool.
3. Grasp the handle and remove the Programmable Temperature Kettle from
the power base. Wipe the inside of the Kettle with a soft, damp cloth
until dry.
4. Wipe the power base with a damp cloth or sponge. Dry thoroughly.
5. Use a soft sponge to remove any fingerprints or surface dirt from
the Programmable Temperature Kettle body.
WARNING: Do not use harsh chemicals or abrasive cleansers as these may
damage the finish of the Kettle.
6. Make sure both the power base and the Programmable Temperature Kettle
is completely dry after cleaning and before use.