6 of 8
Do not use bleach or chlorine-based chemicals to clean. Discoloration of plastic parts can occur.
Wipe down all non stainless steel parts with a food grade spray. Alternatively, wipe down with a
salad oil to keep from rusting.
Do not immerse motor housing in water. Damage to motor can occur. Wipe with damp cloth to clean.
TROUBLE HOOTING
PROBLEMS
SOLUTIONS
Grinder has no power
Check power to outlet. Make sure unit is securely plugged
into outlet
Grinder has no power, but outlet does
First, check and reset circuit breaker. Problem may be
with switch or power cord. Contact customer service.
Grinder hums or runs in only one direction
Grinder has switch or internal problem. Try resetting
circuit breaker. Contact customer service.
Grinder hums or labors to operate
Possible cold gear grease problem. Move grinder to
warmer area. If this does not work contact customer
service.
Grinder runs slowly and erratically
Possible cold gear grease problem. Move grinder to
warmer area. If this does not work contact customer
service.
Meat is backing up at the back of the
grinder
Auger is not able to handle large portions of meat. Cut
meat into smaller pieces so auger can work properly.
Meat is only turning around the auger and
compressing against the head
Meat is too warm. Cool meat to a temperature around 40°.
Meat does not flow through grinder
Make sure grinder head is properly assembled. Check
sharpness of knife blade.
Meat is backing up at head and will not
flow
Meat may be snagging on the auger or other parts.
Lubricate internal parts with food-grade silicone spray.
