-3-
-14-
*This product is designed for usage at
home.
*Your products usage voltage is 220-
240 Volts~50Hz
*Grounded plug is montaged to your
product's electric network cable. This
cable should definitely be plugged in
a grounded socket.
*All electrical network should be set
by a qualified electrician.
*Montage applied by unauthorised
people may cause the product to
operate at low performance, damage
of the product and accidents.
*Feeding cable should not be
exposed to press or smash during
montage. Network cordon should not
be placed near the cookers, it may
cause fire if it melts.
*Do not plug into the socket without
montage of the product is completed.
*Keep the plug at a reachable place
so that you can unplug it in case of
any danger.
*Do not touch the lamps when they
are on for long time. Lamps may hurt
your hand as they will be hot.
*Kitchen cooker hoods are designed
for usage during normal and home-
style cooking. If it is used for other
purposes, failure risk occurs and it will
be out of warranty.
*Obey competent authorities' rules
and directions for passing out outlet
air.(This warning is not valid for usage
without chimney.)
WARNINGS AND SAFETY
*Flaming foods shall not be cooked
under the product.
*Start your product after you put pot,
fry-pan etc. on the hob. Otherwise high
temperature may cause some parts of
your product to get deformed.
*Before you take pot, fry-pan etc. from
the hob, put their lids on.
*Do not leave hot oil on the hob. Pots
that has hot oil in them may cause self-
ignition.
*Pay attention to curtains and covers
during cooking of meals like frying
because oil may flare up.
*Make sure that filters are changed in
convenience. Filters that are not
changed at appropriate time has risk of
causing fire due to oil that will be
gathered on them.
*Do not use filter materials that are not
flame resistant instead of filter.
*Do not operate your product without
filter, do not remove filters when the
product is on.
*In case flame occurs, cut power of the
product and the cooking appliances.
(cut power of the product by plugging it
off the socket).
*Your product may cause fire risk if
cleaning is not applied periodically.
*Cut power of the product before
maintenance process. (Cut power of the
device by unplugging it)
