KitchenAid KSM7581BZ, Инструкция по использованию и уходу

Страница: 8 / 48

8
Setting up your Stand Mixer
Raise Bowl
Fig. 4
Lower Bowl
IMPORTANT: The Stand Mixer may become warm during use. Under heavy loads with extended mixing time
periods, you may not be able to comfortably touch the top of the Stand Mixer. This is normal. The Stand Mixer
motor may emit a pungent odor during initial operation. This is common with electric motors.
Step 5: Test Beater to Bowl Clearance.
Check the proximity of the Flat Beater to the bowl. The
beater should just clear the bottom of the bowl but should not touch it. Plug Stand Mixer in. Turn Stand Mixer
ON and test each speed making sure the beater does not touch the bowl during operation. If the beater is too
far away from the bottom, or is hitting the bowl, proceed to step 6 to make the necessary adjustments.
Step 6: Adjusting your Beater to Bowl Clearance.
Unplug Stand
Mixer. Lower the bowl to the down position. Adjust the Beater Height
Adjustment Screw to lower or raise the bowl, (Fig 4). Repeat Steps 2-5
with the Stainless Steel Whip and Spiral Dough Hook.
Congratulations! Your Stand Mixer is now set up and ready for use.
W10410027A_.indd 8 12/15/11 11:40 AM