9
To Operate the Speed Control
NOTE:
Flashing light indicates ready
to operate. Do not touch beaters.
If the mixer runs when “0” is flashing,
or there is nothing displayed on the
speed indicator, do not use it: call
1-800-541-6390
to arrange
for service.
1. Plug the mixer into an electrical
outlet.
2. Press the “On” button, and the
Speed Indicator will flash “0”. This
indicates the mixer is ready to
operate.
3. Touch the “On” button again and
the mixer will start on speed one.
4. To increase the speed, press the Up
Arrow (
▲
). To decrease the speed,
press the Down Arrow (
▼
).
5. When the mixing job is finished,
shut off the mixer by touching the
“Off” button. Unplug mixer before
removing accessories.
WARNING
Injury Hazard
Unplug mixer before touching
beaters.
Failure to do so can result in
broken bones, cuts or bruises.