12
a
r
b
1. Before using your food processor for
the first time, wash the work bowl,
work bowl cover, mini bowl, feed
tube pusher and blades either by
hand or in the dishwasher, see Care
and Cleaning, page 16.
2. Place power base on a dry level
counter with the controls facing
forward. Do not plug unit in until
completely assembled.
3. Place work bowl on power base,
fitting the center opening over the
power base shaft, making sure the
handle is just to the left of center.
4. Grasp the work bowl handle and turn
to the right until it locks into
position.
5. Select blade or disc.
–To use the multipurpose blade,
place the blade on the power base
shaft. It may be necessary to rotate
the blade slightly so that it is
properly aligned and falls into place.
–To use the reversible slicing/
shredding disc,
grasp the disc
with fingers
away from
slicing or
shredding
blades. Use
care; blades
are sharp. Fit
center opening
of disc over top of attachment stem.
Turn stem counterclockwise to lock
into place. Place assembled disc on
power base
shaft. It may
be necessary
to rotate the
disc slightly so
that it is
properly
aligned and
falls into
place.
Assembling Your Food Processor
Pulse
On
Off
CAUTION:
READ INSTRUCTIONS BEFORE USING
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
WARNING
ý
!
