2-17
CAUTION:
Be very careful when han-
dling the fan in the next step. The edges
are very sharp.
c) Remove the acorn nut from the fan
motor shaft and remove the fan and flat
washer beneath it.
Wires
Convection Fan Motor
d) Remove the three T-10 torx screws
from the insulation cover and remove
the cover and insulation.
f) Remove the three 5/32˝ allen screws
from the motor and remove the motor
from the cover.
e) Unsnap the e-ring from the motor shaft
and remove the ring and flat washer.
6.
To remove the convection fan motor:
a) Remove the convection element (see
step 5). NOTE: It is not necessary to
remove the convection element to re-
move the fan motor. However, there is
a possibility of damaging the element
while removing the motor, so it is advis-
able to remove it.
b) Disconnect the wires from the convec-
tion fan motor terminals.
Cover Screws (1 of 3)
Insulation Cover
Insulation
E-Ring
Flat Washer
Allen Screw
(1 of 3)
Acorn Nut
Convection Motor Fan
Содержание KAC-24
