KitchenAid Architect Series II KGRS206X, Руководство пользователя

Страница: 13 / 72

13
Changing oven temperature display
The oven control is preset to display °F (Fahrenheit) when
shipped from the factory. The control can be changed to
display either Fahrenheit or Celsius.
Example — To change the temperature to display
°C (Celsius) or °F (Fahrenheit):
1. Press and hold Broil keypad for 6 seconds.
2. Press Self Clean keypad to toggle between Fahrenheit
(F) or Celsius (C) temperature display modes
(Figs. 1 & 2).
3. Press START to accept choice.
Important note:
The oven temperature display cannot be modified if Bake
or Self Clean is active.
Fig. 1 Fig. 2
Setting Oven Controls
Setting silent or audible control mode
Silent mode allows the oven control to operate without
audible tones. The control may be programmed for silent
operation and later returned to operating with all the
normal audible tones.
Example — To set for silent or audible mode:
1. Press and hold Delay Start keypad for 6 seconds.
2. Press Self Clean keypad to toggle between beep on
or beep off. (See Figs. 3 & 4).
3. Press START to accept choice.
Fig. 3 Fig. 4
Fig. 5
To cancel the Control Lock feature:
1. Press and hold START until you hear a tone indicating
Control Lock has been deactivated.
2. When the Loc message is no longer displayed, the
oven control keypads will be available for use.
Important note:
If a control keypad is pressed when Control Lock is active,
the control may triple beep indicating the keypad action is
not available when the Control Lock feature is active.
Setting Control Lock
The control may be programmed to lock the
oven control keypads.
To activate the Control Lock feature:
1. Press and hold START until you hear a tone indicating
Control Lock has been activated.
2. Loc will appear in the display (See Fig. 5).