20
3. Remove one end cap by loosening the nuts with a
¹¹⁄₃₂
"
nut
driver and slide the end cap off.
4. Slide the backer panel into the top grille channel and reattach
the end cap.
5. Replace the top grille in the cabinet side trims and pull the
panel down slightly to lock it into place.
Install Overlay Series Custom Panels
IMPORTANT:
■
Install the custom handles prior to installing the panels on
the refrigerator. For more information on KitchenAid
custom handle selection, refer to the KitchenAid Catalog,
visit www.kitchenaid.com, or call 1-800-422-1230.
In Canada, visit www.KitchenAid.ca, or call
1-800-461-5681.
■
Create custom door overlay panels according to the
specifications in the “Overlay Series Custom Panels”
section.
■
KitchenAid is not responsible for the removal or addition of
molding or decorative panels that would not allow access
to the refrigerator for service.
Door Panel Installation
1. Remove all tape and door bracing from the refrigerator door
and freezer drawer.
2. Open the refrigerator door and freezer drawer and remove the
trims.
3. Slide the custom panels into the trims on the refrigerator door
and freezer drawer, making sure that the backer panel fits into
the hinge side trims.
A. Panels
4. Reinstall the handle-side and top trims.
A. Bottom rail
B. Nuts
C. End cap
D. Top rail
A. Backer panel
A. Top grille
B. Cabinet side trim
C
B
A
D
A
B
B
A
A. Refrigerator door trims
B. Freezer drawer trim
A
B
A
