KitchenAid 810-0021, Инструкция по установке и руководство по эксплуатации и уходу

Страница: 26 / 48

Operating Tips
Grill Grid Removal & Grid Lifter
When removing grill grids or adding charcoal briquettes use the grid
lifter to remove grill grid to add charcoal briquettes to the charcoal
pan. Do not leave the grid lifter inside the grill as it will get too hot to
handle.
Adjusting Temperature
Charcoal Tray Handle Operation
By lifting the charcoal tray handle, the charcoal pan can be raised
or lowered to adjust the cooking heat at any time during cooking.
Raising the pan increases direct heat. Lowering the pan reduces
direct heat. Raise the tray after unit has cooled down completely to
make it easier to brush left over ash into the ash tray. Do not raise
the tray higher than halfway when fully loaded with fresh charcoal
briquettes.
Ventilation Door Control Knob Operation
To open the ventilation door, pull the ventilation knob.
To adjust ventilation, move the ventilation knob to the right or left.
To control the cooking temperature, shift the ventilation knob at the
front of the grill to open and close the ventilation. To increase
temperature, open the ventilation. To dampen temperature, close
the ventilation.
NOTE : The temperature should not exceed 500ºF (260ºC). The
temperature can be checked using the temperature gauge on the
grill lid.
TIPS FOR OUTDOOR GRILLING
A. Charcoal grid lifter
A
Low Level
Middle Level
High Level
Charcoal ventilation
control knob
Charcoal tray
handle
26