ENGLISH
USING THE STAND MIXER
|
11
2
Remove the accessory:
Turn the
speed control to “0”, unplug the
Stand Mixer, and tilt the motor head
back; then, press the accessory
upward as far as possible, then turn
the accessory clockwise and pull it
away from the beater shaft.
3
Remove the bowl:
Gently turn
the bowl counterclockwise to release
it from the bowl clamping plate.
USING THE STAND MIXER
DISASSEMBLING THE STAND MIXER
NOTE:
The pouring shield* can be
used to avoid ingredients splashing
out of the bowl when mixing as well
as to easily pour ingredients in the
bowl while mixing.
1
Raise the motor head:
Check to
be sure that the Stand Mixer is
unplugged, and the speed control is
turned to “0”; then slide the locking
lever to the unlock position and lift
the motor head. Once lifted, slide
the locking lever to the lock position
to keep the motor head up.
(
OPTIONAL)
Remove the pouring
shield*:
Lift the front of the pouring
shield* clear of the rim of the bowl,
and pull away from the Stand Mixer.
(OPTIONAL)
Pour ingredients into the
bowl through the pouring chute.
*Accessory sold separately
W10920194C.indb 11
5/10/2018 12:37:31 PM