5-1
DIAGNOSIS & TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Nothing will operate.
• The cooktop is not wired
to a live circuit with the
proper voltage supply.
• A household fuse has
blown, or a circuit breaker
has opened.
• Wire the cooktop into a
live circuit with the proper
voltage.
• Replace the household
fuse or reset the circuit
breaker.
The surface cooking areas
do not operate.
• A household fuse has
blown, or a circuit breaker
has opened.
• The touch controls are not
set properly.
• Replace the household
fuse or reset the circuit
breaker.
• See the “Electronic Touch
Controls” in the “Using
Your Cooktop” section of
the Use and Care Guide.
The touch controls do not re-
spond.
• The correct sequence to
operate the touch controls
is not being followed.
• The touch controls are not
being touched in the cor-
rect location.
• See the “Electronic Touch
Controls” in the “Using
Your Cooktop” section of
the Use and Care Guide.
Cooking does not have the
desired results.
• The cooktop is not level.
• The pan used is not the
correct type or size.
• Level the cooktop.
• Refer to a reliable cook-
book for the recom-
mended pan type and
size.
• The pan should be the
same size, or slightly
larger, than the cooking
area being used.
• Cookware does not fit the
surface cooking area be-
ing used.
Содержание 4322555
