KitchenAid 3405634, Руководство пользователя

Страница: 9 / 44

9
Starting your dryer
(cont.)
6. Push the Start button.
Stopping and restarting your dryer
You can stop your dryer anytime during a cycle.
To stop your dryer:
Open the dryer door or turn the Cycle Control knob
to Off.
NOTE: The Cycle Control knob should point to an
Off area when the dryer is not in use.
To restart your dryer:
Close the door, select a new cycle and temperature
(if desired), and push the Start button.
NOTE: Your dryer stops automatically when a
cycle ends.
Cycle and temperature tips
•
In the Automatic cycle (Sensor Dry), the FLO-
THRU
™
Drying System automatically reduces
the heat near the end of the cycle to prevent
overdrying.
•
If your dryer has a special Ultra Low or Extra Low
temperature setting, this reduces drying tempera-
tures and provides enhanced fabric care for
delicates and other fine fabrics.
•
If some types of loads in the cycle descriptions
have more than one suggested temperature
setting, choose the lowest setting available on
your dryer.
•
The last few minutes of all cycles are without heat
to make the load cooler to handle.
Selecting the right cycle and temperature setting
Drying tips
•
Make sure you have selected the correct cycle
and temperature for your load. For example,
select a High temperature setting for best drying
results with extra heavy items.
•
Always follow care label directions when they
are available.
•
If you use fabric softener sheets, always use
fabric softener sheets labeled as dryer safe and
follow package instructions carefully.
•
Remove the load from the dryer as soon as tum-
bling stops to reduce wrinkling. This is especially
important for permanent press, knits, and syn-
thetic fabrics.
O p e r a t i n g Y o u r D r y e r