INSTALLATION & OPERATION
Installation & placing the batteries
1.
Open battery compartment
on bottom of dispenser.
Battery
compartment
2.
Correctly insert 4 AA
Alkaline batteries, observing
the polarities in the battery
compartment.
Rotate and lock the circular
cap into place.
3.
Rotate and lock
the circular cap
into place.
2.
. Opening the top cover.
Fill the tank with soap
Cleaning
3.
Pouring desired amount of
liquid into the tank.
• Note: DO NOT overfill the tank
(480ml Max.)
• Do not pour liquid before loading the battery.
• Note: When the battery level is low,
the LED indicator will light up RED.
4.
Switch the device ON by pressing
and holding the button for 2 seconds,
the LED indicator will light up green.
1.
Put the battery into the battery compartment.
Liquid outlet
LED indicator
Liquid outlet
Sensor
area
Battery
compartment
Top cover
Switch /
Volume control
Soap
To switch OFF the device, press
and hold the button for 2 seconds,
the LED indicator will light up red.
LED indicator
Switch
LED indicator
Switch
5.
Liquid soap volume control
• There are 5 different levels on the dispenser.
• When installing the device, its automatically
set at level 3.
• The dispensing volume can be adjusted,
in sequence 1
→
2
→
3
→
4
→
5,
by pushing the or
• Use fresh new soap only, and clean the tank
properly before each re-fill.
• Clean the exterior of the appliance with a
damp cloth.
TECHINCAL DATA
• Tank: refillable 480 ml
• Battery powered: 4x AA Alkaline batteries
(not included)
• Dimensions: 85(W) x162(D) x188(H) mm
• Weight: 400 grams (w/o batteries)
