TO USE:
1. Once unit is in place and gas connection is set up slide the crumb tray and broiler rack into place.
2. Turn the control knob to the ON position and press the ignition switch.
3. Slide out broiler rack and place food on rack and slide back in at the desired position.
4. You can adjust the intensity of the burner by rotating the control knob(s).
CLEANING - NOTE:
To maintain cleanliness and increase service life, this item should be cleaned daily. Do not immerse
the unit in water or any other liquid. Before cleaning or attempting to move this item always turn off and let cool.
1. Remove the broiler rack and crumb tray and wash separately.
2. Wipe the entire unit with a clean soft cloth until it is completely dry.
3. To avoid damage to the unit, do not use abrasive cleaners or scouring pads.
4. If soap or chemical cleaners are used, be sure they are completely rinsed away with clean water immediately after
cleaning. Chemical residue could damage or corrode the surfaces of the unit.
To avoid serious injury or damage, never attempt to repair or replace a damaged power cord yourself. Contact a professional repair
service.
Burner
Broiler Rack
Crumb Tray
Gas Inlet Pipe
Ignition Switch
Manual Control Knob
PRODUCT FEATURES:
Содержание KMCHM
Страница 5: ...Parts Diagram for the Gas Cheesemelter...
