11
AFTER SALES SUPPORT
866-235-5029
[email protected] 44669, 03/14, CM2001T
Other Useful Information (Cont.)
Removing Mineral Deposits
From time to time, you may need to clean off any mineral deposits (limescale) left by water inside
your Coffee Maker to keep it operating efficiently. How often you have to do this depends on the
water hardness in your area and on how often you use the machine.
You can use a commercially available descaling agent for household products (according to the
instructions on the packet) to descale the Coffee Maker, if the product is recommended for use in
an automatic coffee maker. Or simply use a water and vinegar mixture and proceed according to
the steps below.
1. Fill the water tank with water and descaler to the MAX level in the gauge of coffee maker (the
scale of water and descaler is 4:1, the detail refers to the instruction of descaler. Please use
“household descaler”, you can use the citric acid instead of the descaler (the one hundred parts
of water and three parts of citric acid).
2. Place the carafe on the heating plate and align the carafe with the center of the brewing
basket.
3. Press the ON/AUTO/OFF button once and the BREW indicator will be illuminated red. After a
while, water will drop out automatically.
4. After percolating the equivalent then switch off the appliance by pressing the ON/AUTO/OFF
button again. The BREW indicator will be extinguished.
5. Let the solution work 15 minutes then repeat steps 3-5 again.
6. Turn the appliance on by pressing the ON/AUTO/OFF button once and run off the water until the
water tank is completely empty.
7. Rinse by operating the appliance with water at least 3 times.
8. When the cycle is completed turn the Coffee Maker off.
