Kitchen Living 11/14, Руководство пользователя, Страница: 8 / 14

7
AFTER SALES SUPPORT
866-235-5029
mp656@messageplex.com 44192, 11/14, CO-01
Instructions (Cont.)
Using the bottle opener
• Read this manual to familiarise yourself with appliance.
Pay particular attention to the safety instructions on the
previous pages.
• Unplug the appliance from the power supply before using
the bottle opener.
• To open a bottle, grasp it and position the cap under the
metal hook part in the bottle opener (see Fig. 4).
NOTE:
Be sure the bottle neck is not under the metal hook part,
or the glass may break. Hold the can opener with one
hand and pull down to pop the cap off with the other one.
• The bottle opener will only remove metal bottle caps. Do
not use it for a bottle with screw-off cap or pull ring cap.
NOTE:
The can required to be opened should be between 2 inches (50mm) to 4 inches (100mm)
in diameter and 7 inches (178mm) max in height. In the case total weight of can is over 18
0z (510g), it is necessary to press and hold the can opener to avoid overturning.
DO NOT operate the can opener continuously for more than 1 minute.
After opening 10 cans consecutively the can opener must cool down for at least five
minutes.
CAUTION: Avoid contacting with the cut edges of the can or lids as they are sharp, carefully
remove the lid from the magnet and discard.
Can opening tips
• This can opener should not be used to open cans designed to open by another method, such
as a pull tab,peel-off foil seal, rolling key, rimless cans or cans with angled corners.
• If there is a dent in the rim of a can, open the other end or start the cutting action just beyond
the dent.
Hold the can
opener with
one hand
Pull down to pop
the cap off with
the other hand
Fig. 4