!
Fixing cabinets to the wall
Please ensure the cabinet is fixed securely to the wall and also to the adjacent cabinets.
•
For 600 wide appliance housing units, this can be done using metal angle brackets or
appropriate fixings (not supplied) behind the appliance, before it is slid into position.
•
For Larder Units, this can be done at the top of the cabinet, using metal angle
brackets or appropriate fixings (not supplied). It is essential that the cabinet is
prevented from tipping forward, which could cause injury or damage.
Appendix
Fixed Shelves
The fixed shelf system uses a metal camlock housing, together with a screw-in bolt that fixes into the
cabinet end panel.
1. Use a soft rubber mallet to
tap the Rafix connector hous-
ing into the pre-drilled holes.
2. The screw-in bolt fixes into
the relevant holes in end panel;
do not overtighten. The shelf
drops into position as shown.
3. Lock off the fittings via the
posidrive screw head inside the
Rafix housing.
Fixed Shelves
NOTE
All appliances must be seated on a Fixed Shelf. Never use an adjustable shelf for this purpose.
!
A-1
