2
BEFORE YOU BEGIN
Read this manual completely and carefully. Installation of this cooktop must conform with local codes, or in
the absence of local codes, with the National Fuel Gas Code. This appliance is ETL certified by Intertek.
Note to Consumer:
Keep the manual for future reference.
This appliance must be properly grounded.
- Proper installation is the responsibility of the installer..
- Product failure due to improper installation is not covered under the Warranty.
- Remove all tape and packaging..
- Make sure the burners are properly seated and level..
- Take the accessory pack out of the packing.
- Check to be sure that no cooktop parts have come loose during shipping.
- IMPORTANT – Observe all governing codes and ordinances.
NOTICE
−
Prior to installation, make sure gas and pressure supplied is compatible with the appliance settings
−
Settings of this appliance are stated on the rating label.
−
This gas cooktop is not connected to a combustion products evacuation device. Particular attention
shall be given to the relevant requirement regarding ventilation.
−
Use of this gas cooktop will produce heat, moisture and products of combustion. Ensure that the
kitchen is well ventilated. Keep a window open or install a mechanical ventilation device.
