Kitagawa NPGT, Инструкция по эксплуатации, Страница: 20 / 28

18
6-2. Installing the jaws
Install the jaws using the two
mounting bolt holes and the
supplied positioning bushings.
The jaws and jaw fixing bolts are
to be prepared by the customer.
Model NPGT 08 10
Mounting
Bolt
Size M5 M6
Thread
depth
A (mm) 8.5 10
Positioning
pin hole
Diameter
(H8)
B (mm)
φ
8
φ
10
Depth C (mm) 1.5 2
●
Be sure to tighten the bolts with the specified torque. Be sure to tighten the
bolts with the specified torque. Lack of tightening torque or excessive torque
could break the bolts, causing the jaws or conveyed workpiece to fly out.
●
Before installing the jaws, disconnect the air piping.
Jaw fixing bolt
（
To be prepared by the customer
）
Jaw
（
To be prepared by the customer
）
Master jaw
Positioning bushing
Lead-in part
Positioning bushing
Attach positioning bushings with the lead-in part
facing the jaw side.