Kitagawa BBT200, Инструкция по эксплуатации

Страница: 33 / 50

32
・
To keep the chuck running in the best condition for a long time, adequate grease
lubrication is necessary. Insufficient grease lubrication causes a drop in the
gripping force, operation failure at low hydraulic pressure, drop in gripping
precision, abnormal wearing, seizing, etc. The work will fly out due to a drop in
the gripping force and this is dangerous.
4. Safety information about grease and anti-rust oil
Applicable range
・
Designated grease
・
Antirust agent applied to the product at the delivery.
First aid measures
After inhalation: Remove victim to fresh air. If symptoms persist, call a physician.
After contact with skin: Wash off with mild cleaners and plenty of water. If symptoms persist,
call a physician.
After contact with eyes: Rinse with plenty of water. If symptoms persist, call a physician.
After ingestion: If large amounts are swallowed, do not induce vomiting. Obtain medical
attention.
・
Please refer to each MSDS about the grease and the anti-rust oil which you prepared.
6-3. Disassembling
Disassembling procedures
Read the following disassembling procedures with reference to page 7.
1. Turn off the main power of the machine before starting work.
2. Loosen the jaw attaching bolt [13] and remove the soft jaw [4] and the T nut [5].
3. Remove the cover [8].
4. Turn the draw nut [7] with the handle [10] while loosening the chuck attaching bolt [14],
and remove the chuck from the spindle.
5. Remove the wedge plunger [2] to the chuck rear side.
6. Remove the master jaw [3] to the inner periphery side of the chuck.
7. Assemble again while sufficiently coating the recommended grease in the reverse
procedures of disassembling. At this time, pay sufficient attention so as not to make a
mistake in the numbers of the body [1], master jaw [3], and the wedge plunger [2].
8. Refer to page 44 about the installation procedure. (8-4. Attachment of chuck).