Kitables Lego Drone, Инструкции к набору

Страница: 10 / 23

M2
Lego Drone Kit Instructions
Solder a CW motor (blue and red wires) to
the M2 location on the board. You will see a
positive (+) and negative (-) terminal. Solder
the BLUE wire to the (-) terminal and the RED
wire to the (+) terminal as shown.
Solder a CW motor (blue and red wires) to
the M3 location on the board. You will see a
positive (+) and negative (-) terminal. Solder
the BLUE wire to the (-) terminal and the RED
wire to the (+) terminal as shown.
M3
(-)
(-)
(+)
(+)