KisanKraft
®
Water Pumps
with
Petrol Start Kerosene Run Engine
KK-WPK-20 / 30
: +91.80. 22178200
Page 9 of 44
It would be kept 0.7-0.8 mm between the spark plug and no carbon so as to assure the
normal running
STORAGE
Cool the engine and keep the fuel valve in the “OFF” position before moving or storing
indoors to avoid the burning or fire.
1.
Keep the storage place dry and less dust.
2.
Clean the inner parts of the engine.
3.
Replace the oil after completely discharging the fuel tank and the carburetor.
4.
Disconnect the spark plug to infuse 2-3 grams of oil into the cylinder and rotate
the engine 3-4 times and then equip the spark plug.
5.
Cover the pump cover to avoid dust.
TROUBLESHOOTING
Problem
Probable cause
Action to be taken
The Engine can’t be
started
Refer the Engine manual
Refer the Engine manual
The pump cannot
pump water
The water infused is not enough
Fill the pump with enough
water.
The filter is air
– logged.
Clear the air from the filter.
The tie-in is not firmly equipped ,
Suction pile is leaking.
Ensure proper suction
Packing is proper and leak
free.
The pipe is damaged.
Replace the pipe.
Whether the head lift is too high
Never exceed the rated
max. Lift, if so lower the
head lift.
Insufficient flux
Any block with impeller or
strainer
Remove the blockage in
the strainer
Gas leakage in inlet pipe
Fix any leakage in the pipe
Damage in impeller
Replace the impeller