KisanKraft
®
Warranty Certificate
(
CUSTOMER
C
OPY
)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80.22178200
Page 35 of 94
Adjustment of the Axle and the Wheel Base:
The wheel base must be adjusted to meet the
working conditions. By hooking a renovator directly
onto the shaft of the machine, it can work within
very narrow beds in the fields.
CORRECT ASSEMBLY AND USE
Installation and Use of the Intercultivator and Its Attachments
Rear Hooking Connector:
The Intercultivator, resistance bar, banking machine
and multi-functional attachments are to be hooked up
with this connector.
Front Hooking Connector
The front balance piece, front carrier and front working
units are to be hooked up with this connector.
Axle and Shaft Sleeve
The tires, a number of operating machines and
attached wheels are to be connected here.
PTO Shaft
The PTO shaft serves to transmit the power delivered
by the engine. For this machine, it is an output shaft,
for the operating machines, it is input shaft.
It can be used when it is desired to use a rotary force
such as that produced by the intercultivator. In case no
operating machine is connected, it will rotate when the
main clutch is engaged. For the sake of safety , it must
be guarded with a cover
Note
: If the PTO shaft is not used, it must be well greased and protected with a cover.
