KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-520
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 13 of 24
OPERATION
.
Adding oil
Mixing rate between 93# Petrol and two-stroke oil is 25:1
Attention: 1. forbid to use pure Petrol or the mixture oil rate above 25:1.
Adding fuel must be done under the instruction of the fireproofing
Start up
1)
Press the button of carburetor 5-6 times, until some fuel in the tube, then close the broker.
Note: if engine is in high temperature, you should put the choker on the original position.
2)
Open the accelerograph 113-1/2.
3)
Pull the starter smoothly, after starting the engine, open choker fully.
Note: (1). Make sure there is nothing lock the gear wheels before starting
(2). when the gear blade is running, make sure the gear blade does not come up against
anything or anybody.
Assignment
Strictly control the rotating speed, the free-load forward speed should be at 0.5m/sec when
the rotate speed arrives at 8000-9000/min.
To be ensure the quality of rotating blade, don't touch it to other objects, such as stone.
Stopping
1)
Put the throttle lever at the idle speed, make the engine run 2-3 minutes.
2)
Turn off the stop switch.
Note: In urgent case, turn off the throttle switch, and turn off the stop switch. Keep your hands far
away from rotating blade, the gear is still turning after stopping the machine.
MAINTENANCE
Maintenance body
1)
After the machine works for one or two hours or when stopping to add oil; you must check
each screw and nut on the machine to make sure they are not loosening.
2)
Add the lube in the gear box when the machine works around 20 hours
3)
When the blade or gear damaged, please repair or replace at once.
Maintenance engine
