KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-406D
KK-IC-406D (Electric Start)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 21 of 56
•
Don't make any alterations in Design, Operations and Functioning of
Agricultural Inter-cultivator other than Company's recommendation
•
Do not operate the engine in a confined space where dangerous carbon
monoxide fumes can collect.
Important Cautions during Operation
1.
Pay attention to working situations and sound of each part during the work, check
whether the connection between different parts is ok or not, loose connections are
not allowed. If abnormalities are found, stop the machine and solve the problem
immediately.
2.
A cold machine should not be used to do heavy load work immediately after the
machine is started, especially for the new machines or the ones after overhaul.
3.
Pay attention to checking the oil levels of the diesel engine and gearbox. Refill the
engine oil when it is not enough
4.
Do not cool the diesel engine by pouring water.
5.
Be cautious
about the machine’s tilting while farming.
6.
Machine fixed with Intercultural/Weeding Operations blades should not be used on
sandy or stony place.
7.
After using the machine for farming, pay attention to cleaning dirt, weeds and smear
on the surface of the machine and keep the machine clean.
8.
Clean the air cleaner with sponge or the wire mesh frequently, and change the engine
oil. (Keep an eye on the marking on the empty air cleaner oil level)
Maintenance & Service
During the working period of the Inter-cultivator, due to the changing running speeds, abrasion
and varying loads, phenomena of bolts loosening and parts wearing are inevitable which in turn
may lead to the malfunction of the system, abnormalities of clearances, declination of engine
power, more oil consumption, malfunction of each part, more failures of the machine, and the
problems affect the normal use of the Inter-cultivator. To reduce chances of troubles, it is better
to do a strict and regular maintenance job which emphasizes precautionary measures to keep
a
good performance and extend the machine’s working life.
1.
Keep all nuts, bolts and screw tight to ensure the equipment is in safe working
condition.
2.
Never store the equipment with diesel in the tank inside a building where fumes can
reach an open flame or spark.
3.
Allow the engine to cool before storing in any enclosed place.
4.
To reduce the fire hazard, keep the engine, muffler, battery compartment and diesel
storage area free of inflammable material and excessive grease.
5.
Replace worn or damaged parts for safety.
6.
If the fuel tank has to be drained, this shall be done outdoors
7.
After adjustment or maintenance, the safety protection guard must be attached to the
machine.
Technical Service of Intercultivator
1.
MAINTENANCE AFTER EACH WORK SHIFT (conducted before and after each shift)
•
Listen and observe if there are any abnormalities of each part (such as
abnormal sound, overheating and bolt loosening)
•
Check if there is oil leakage in diesel engine, gearbox and Traveling box.
