KisanKraft
™
SPRAYER-MANUAL
KK - 1L,1.5L,2L,3L,5L,8L,11L
KK - 12L,16L
: www.kisankraft.com
: +91.80. 22178200
Page 13 of 24
TROUBLE SHOOTING
Problem
Cause
Remedy
The sprayer has Leakage
and is not spraying well.
Sealing plate is damaged or
not wrenched firm
Replace the sealing plate or
wrench firm
The operation arm exerts
more
pressure while
pumping
Spray head or filter block up
Clean the filter and spray
head, add Vaseline to the
activating parts.
Need to apply less pressure
while pumping the operation
arm
Abrasion of the bowl or the
sealing ball.
Change the bowl or sealing
ball.
The operation arm exerts no
pressure while pumping
Sealing ball is missing or
removed
Fix the sealing ball properly
MAINTENANCE AND STORAGE
Daily maintenance:
The following maintenance should be done after daily job.
1. Cleaning the dust on the surface of the machine.
2. Clean the chemical tank with clean water and wipe it dry.
3. Check if there is any leakage of water. If there is a leakage, remedy procedures are to
be taken.
4. Check to see if the screws are loose or lost. If so, please tighten the screw or replace.
5. The machine after maintenance should be stored in a place which is dry and has good
ventilation. It must be far away from any fire source and sunlight.
Long term Storage:
The machine which is to be stored t for a long time should be maintained as follows:
1. Clean the machine surface carefully.
2. Discard any chemical in the tank and the pump, clean them with clean water.
3. All the plastic parts must neither be exposed to the sunlight nor pressed by heavy
matter.
4. Cover the machine with plastic dustcoat and store in a dry and clean place.
